Thank you for reaching out - I'd be more than happy to clear up any confusion!
The Rota-Flex pin boxes, like part # LC176440, are NOT compatible with the E-Series and Q-Series Curt 5th wheel hitches because they have a spherical head which won't be stable enough to work with the Rota-Flex cushioning design. So if you really like the Curt 5th wheel hitch design you need to either swap out your pin box or you need to use the A20 Curt hitch which has a torsion head that is compatible with... view full answer...
We carry a bit of a variety of RV sliding cargo trays, like the MORryde RV Cargo Sliding Tray - 60" x 26" # MR47FR. Aside from dimensions you can choose trays that have a 2-way slide, like part # MR93FR, or can extend a different percentage out more than others. Each of these trays are made heavy duty and have well over a 150lb capacity. I've attached a short video below where Evangeline will show you the MORryde sliding cargo tray and go over the use and features it has.
If you could... view full answer...
You have a good eye because your Hobie Pro Angler 14 kayak would easily be transported with the Rack and Roll trailer, which is the following part number:
- Yakima Rack and Roll Trailer - 78" # Y08107
The # Y08107 is able to haul up to 250 lbs, giving you about 100 lbs of capacity left after loading your Hobie kayak, which means you can easily carry a second kayak or bike.
For a compatible kayak carrier you need something able to handle the weight of your Hobie, and for that go with... view full answer...
To lubricate the Curt Rota-Flex 5th Wheel Pin Box # LC328329 pivot points you'll just need a can of dry grease like part # RM-747 to grease the points without attracting dirt and debris that could gunk up the brackets. You'll just spray it on the points I have pictured below and try to work the king pin plate back and forth to let it fully sink in. view full answer...
The Single Rocker Switch # 37212225 fits cutout dimensions of 1-5/8" tall x 1-1/4" wide so if that's what you have on your control panel then this will work for you.
We have some other options that match your style a little better and fit a 1.85" tall x 1.20" wide cutout but they are on/off/on and have 4-Pin # 37212395 and 5-Pin # 37212295 configurations on the back depending on what you need to wire the switch up to. view full answer...
Go To Results